Product Data Sheet Show all documents

Sika® Antisol®-100 LK

WATER-DISPERSED, ACRYLIC COPOLYMER BASED CONCRETE CURING COMPOUND

Sika® Antisol® 100 LK is a water-dispersed acrylic copolymer based curing compound. It is ready for use and simple to apply. Sika® Antisol® 100 LK will form a thin film, covering the surface of the concrete to prevent premature water loss due to evaporation.

Sika® Antisol® 100 LK provides the following beneficial properties to concrete surfaces:
▪ Reduces incidence of plastic cracking
▪ Reduces shrinkage
▪ Reduces dusting
▪ Increases frost resistance
▪ Replaces labour intensive curing methods such as wet-Hessian, watering, etc.
▪ Can be overcoated without affecting the bonding of the subsequent application (concrete surfaces to be washed prior to overcoating in accordance with normal practice)
▪ Will not re-emulsify in contact with water therefore allows overcoating even where back pressure of water is expected
Product Data Sheet Show all documents

Usage

Sika® Antisol® 100 LK is sprayed onto newly placed concrete surfaces to form a thin film barrier against premature water loss, without disturbing the normal setting action. Sika® Antisol® 100 LK is suitable where subsequent surface treatments such as screed, protective coating, decorative paint, etc. are required.  

Advantages

Sika® Antisol® 100 LK provides the following beneficial properties to concrete surfaces:
▪ Reduces incidence of plastic cracking
▪ Reduces shrinkage
▪ Reduces dusting
▪ Increases frost resistance
▪ Replaces labour intensive curing methods such as wet-Hessian, watering, etc.
▪ Can be overcoated without affecting the bonding of the subsequent application (concrete surfaces to be washed prior to overcoating in accordance with normal practice)
▪ Will not re-emulsify in contact with water therefore allows overcoating even where back pressure of water is expected

Packaging

▪ 05 L pail
▪ 20 L pail

▪ 1000 L IBC 

Colour

Milky White liquid

Product Details

Product Information

Composition

Water-dispersed, acrylic polymer

Shelf life

6 months from the date of production

Storage conditions

Stored properly in original, unopened and undamaged sealed packaging in dry conditions. Keep away from direct sunlight.

Application

Consumption

Recommended dosage

5 – 6.5 m² per litre depending on wind, humidity and temperature conditions

 
Application steps

APPLICATION INSTRUCTIONS

APPLICATION
Sika® Antisol® 100 LK is ready to use. Do not dilute. Stir wellbefore use. Sika® Antisol® 100 LK curing compound can be sprayed, brushed or rolled onto newly placed concrete. Apply as soon as possible after final trowelling when surface water has disappeared (approximately ½ –2 hours depending on ambient conditions). For vertical surfaces, apply immediately after removal of formwork. After application, the area must be protected from rain for at least 2–3 hours.

Sika® Antisol® 100 LK is transparent after curing.

CLEANING OF EQUIPMENT

Clean all tools and application equipment with water immediately after use. Hardened and/or cured material can only be removed mechanically.

Documents